Show simple item record

dc.contributor.authorH. Ezzat
dc.contributor.authorF. Erdogan
dc.date.accessioned2017-05-08T23:14:07Z
dc.date.available2017-05-08T23:14:07Z
dc.date.copyrightNovember, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28215#323_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96288
dc.description.abstractIn this paper the problem of fatigue crack propagation and ductile fracture of a cylindrical shell containing a macroscopic circumferential flaw is considered. The main interest in the study is in applications to line pipes and other cylindrical containers under secondary axial stresses in addition to the primary stresses coming from the internal pressure. The stress intensity factor for the part-through crack used in analyzing and correlating the fatigue crack propagation rate is obtained by using a line spring model in conjunction with Reissner’s shell theory. To analyze the ductile fracture instability and to correlate the experimental and theoretical results, the crack mouth opening displacement is used as the parameter. The experiments were performed on 20-in-dia (o.d.) and 0.34-in-thick X60 steel pipes. A 0.025-in-wide part-through circumferential flaw was introduced into the pipes as a crack starter which were then tested under four-point bending. The limited data on fatigue crack propagation give the expected result, namely that the crack propagation rate in pipes may be predicted from the fatigue results performed on simpler geometries provided the stress intensity factors in pipes are calculated with sufficient accuracy. The ductile fracture results show that the technique based on the asymptotic behavior of COD may be quite useful to determine a conservative estimate of the fracture instability load.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Fracture of Cylindrical Shells Containing a Part-Through Circumferential Crack
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264224
dc.journal.fristpage323
dc.journal.lastpage330
dc.identifier.eissn1528-8978
dc.keywordsFracture (Process)
dc.keywordsPipes
dc.keywordsStress
dc.keywordsDuctile fracture
dc.keywordsFatigue cracks
dc.keywordsShells
dc.keywordsSprings
dc.keywordsCrack propagation
dc.keywordsDisplacement
dc.keywordsPressure
dc.keywordsFatigue
dc.keywordsSteel AND Containers
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record