| dc.contributor.author | B. R. Bass | |
| dc.contributor.author | R. H. Bryan | |
| dc.contributor.author | J. W. Bryson | |
| dc.contributor.author | J. G. Merkle | |
| dc.date.accessioned | 2017-05-08T23:14:07Z | |
| dc.date.available | 2017-05-08T23:14:07Z | |
| dc.date.copyright | November, 1982 | |
| dc.date.issued | 1982 | |
| dc.identifier.issn | 0094-9930 | |
| dc.identifier.other | JPVTAS-28215#308_1.pdf | |
| dc.identifier.uri | http://yetl.yabesh.ir/yetl/handle/yetl/96286 | |
| dc.description.abstract | In nonlinear applications of computational fracture mechanics, energy release rate techniques are used increasingly for computing stress intensity parameters of crack configurations. Recently, deLorenzi used the virtual-crack-extension method to derive an analytical expression for the energy release rate that is better suited for three-dimensional calculations than the well-known J -integral. Certain studies of fracture phenomena, such as pressurized-thermal-shock of cracked structures, require that crack tip parameters be determined for combined thermal and mechanical loads. A method is proposed here that modifies the isothermal formulation of deLorenzi to account for thermal strains in cracked bodies. This combined thermo-mechanical formulation of the energy release rate is valid for general fracture, including nonplanar fracture, and applies to thermo-elastic as well as deformation plasticity material models. Two applications of the technique are described here. In the first, semi-elliptical surface cracks in an experimental test vessel are analyzed under elastic-plastic conditions using the finite element method. The second application is a thick-walled test vessel subjected to combined pressure and thermal shock loading. | |
| dc.publisher | The American Society of Mechanical Engineers (ASME) | |
| dc.title | Applications of Energy Release Rate Techniques to Part-Through Cracks in Experimental Pressure Vessels | |
| dc.type | Journal Paper | |
| dc.journal.volume | 104 | |
| dc.journal.issue | 4 | |
| dc.journal.title | Journal of Pressure Vessel Technology | |
| dc.identifier.doi | 10.1115/1.3264222 | |
| dc.journal.fristpage | 308 | |
| dc.journal.lastpage | 316 | |
| dc.identifier.eissn | 1528-8978 | |
| dc.keywords | Pressure | |
| dc.keywords | Plasticity | |
| dc.keywords | Deformation | |
| dc.keywords | Fracture mechanics | |
| dc.keywords | Pressure vessels | |
| dc.keywords | Stress | |
| dc.keywords | Finite element methods | |
| dc.keywords | Shock (Mechanics) | |
| dc.keywords | Fracture (Materials) | |
| dc.keywords | Fracture (Process) | |
| dc.keywords | Surface cracks | |
| dc.keywords | Thermal shock AND Vessels | |
| dc.tree | Journal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004 | |
| dc.contenttype | Fulltext | |