Show simple item record

dc.contributor.authorT. Nishioka
dc.contributor.authorS. N. Atluri
dc.date.accessioned2017-05-08T23:14:06Z
dc.date.available2017-05-08T23:14:06Z
dc.date.copyrightNovember, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28215#299_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96285
dc.description.abstractAn alternating method, in conjunction with the finite element method and a newly developed analytical solution for an elliptical crack in an infinite solid, is used to determine stress intensity factors for semi-elliptical surface flaws in cylindrical pressure vessels. The present finite element alternating method leads to a very inexpensive procedure for routine evaluation of accurate stress intensity factors for flawed pressure vessels. The problems considered in the present paper are: (i) an outer semi-elliptical surface crack in a thick cylinder, and (ii) inner semi-elliptical surface cracks in a thin cylinder which were recommended for analysis by the ASME Boiler and Pressure Vessel Code (Section III, App. G, 1977). For each crack geometry of an inner surface crack, seven independent loadings, such as internal pressure loading on the cylinder surface and polynomial pressure loadings from constant to fifth order on the crack surface, are considered. From the analyses of these loadings, the magnification factors for the internal pressure loading and the polynomial influence functions for the polynomial crack surface loadings are determined. By the method of superposition, the magnification factors for internally pressurized cylinders are rederived by using the polynomial influence functions to check the internal consistency of the present analysis. These values agree excellently with the magnification factors obtained directly. The present results are also compared with the results available in literature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Surface Flaw in Pressure Vessels by a New 3-Dimensional Alternating Method
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264221
dc.journal.fristpage299
dc.journal.lastpage307
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsFracture (Materials)
dc.keywordsCylinders
dc.keywordsPolynomials
dc.keywordsSurface cracks
dc.keywordsPressure
dc.keywordsFunctions
dc.keywordsStress
dc.keywordsFinite element methods
dc.keywordsFinite element analysis
dc.keywordsASME Boiler and Pressure Vessel Code AND Geometry
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record