Show simple item record

dc.contributor.authorI. S. Raju
dc.contributor.authorJ. C. Newman
dc.date.accessioned2017-05-08T23:14:06Z
dc.date.available2017-05-08T23:14:06Z
dc.date.copyrightNovember, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28215#293_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96284
dc.description.abstractThe purpose of this paper is to present stress-intensity factor influence coefficients for a wide range of semi-elliptical surface cracks on the inside or outside of a cylinder. The crack surfaces were subjected to four stress distributions: uniform, linear, quadratic, and cubic. These four solutions can be superimposed to obtain stress-intensity factor solutions for other stress distributions, such as those caused by internal pressure and by thermal shock. The results for internal pressure are given herein. The ratio of crack depth to crack length from 0.2 to 1; the ratio of crack depth to wall thickness ranged from 0.2 to 0.8; and the ratio of wall thickness to vessel radius was 0.1 or 0.25. The stress-intensity factors were calculated by a three-dimensional finite-element method. The finite-element models employ singularity elements along the crack front and linear-strain elements elsewhere. The models had about 6500 degrees of freedom. The stress-intensity factors were evaluated from a nodal-force method. The present results were also compared to other analyses of surface cracks in cylinders. The results from a boundary-integral equation method agreed well (±2 percent), and those from other finite-element methods agreed fairly well (±10 percent) with the present results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Intensity Factors for Internal and External Surface Cracks in Cylindrical Vessels
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264220
dc.journal.fristpage293
dc.journal.lastpage298
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsSurface cracks
dc.keywordsVessels
dc.keywordsFracture (Materials)
dc.keywordsCylinders
dc.keywordsFinite element methods
dc.keywordsPressure
dc.keywordsWall thickness
dc.keywordsThermal shock
dc.keywordsForce
dc.keywordsEquations
dc.keywordsFinite element model AND Degrees of freedom
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record