Show simple item record

dc.contributor.authorD. M. Parks
dc.contributor.authorC. S. White
dc.date.accessioned2017-05-08T23:14:06Z
dc.date.available2017-05-08T23:14:06Z
dc.date.copyrightNovember, 1982
dc.date.issued1982
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28215#287_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/96283
dc.description.abstractThe elastic line-spring finite element of Parks, et al. [1], which was incorporated into the ABAQUS© finite element program, is extended to include elastic-plastic response for approximate evaluation of the J -integral in surface-cracked plates or shells. J -analysis of a long axial crack in a pressurized cylinder is performed both with the virtual crack extension method and with a single elastic-plastic line-spring element attached to a 180-deg ring of shell elements constrained to (axial) plane strain. Agreement of the two models is generally good, both in the elastic range (as was noted earlier by Buchalet and Bamford) and in the plastic range. An axially cracked, internally pressurized cylinder containing a semi-elliptical flaw of aspect ratio a/c = 1/3, and of varying maximum relative depths a/t has also been analyzed.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleElastic-Plastic Line-Spring Finite Elements for Surface-Cracked Plates and Shells
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3264219
dc.journal.fristpage287
dc.journal.lastpage292
dc.identifier.eissn1528-8978
dc.keywordsFinite element analysis
dc.keywordsPlates (structures)
dc.keywordsShells
dc.keywordsSprings
dc.keywordsFracture (Materials)
dc.keywordsCylinders AND Plane strain
dc.treeJournal of Pressure Vessel Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record