Show simple item record

dc.contributor.authorA. J. Rosakis
dc.contributor.authorL. B. Freund
dc.date.accessioned2017-05-08T23:13:27Z
dc.date.available2017-05-08T23:13:27Z
dc.date.copyrightApril, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26887#115_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95893
dc.description.abstractThe shadow spot method has been established as a valuable experimental procedure for measuring elastic stress intensity factors in planar fracture specimens. It is noted here that if the crack-tip deformation field in specimens of ductile materials can be characterized by means of a single plastic intensity factor, analogous to the stress intensity factor in linear elastic fracture mechanics, then the shadow spot method has potential for use in measuring this intensity factor. The value of the J-integral is adopted as the plastic strain intensity factor, and the lateral contraction of an elastic-ideally plastic planar specimen is calculated in terms of J from the nonhardening limit of the HRR asymptotic field of elastic-plastic fracture mechanics. The theoretical caustic curve which would be generated by geometrical reflection of normally incident parallel light from points of the deformed specimen surface lying well within the plastic zone is determined, and it is shown that the value of J is proportional to the maximum transverse diameter of the shadow spot to the third power. Results of preliminary experiments, in which values of J for a given single edge notched steel plate specimen are inferred from measurements peformed separately from the elastically and plastically deforming parts of the specimen, are also reported.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptical Measurement of the Plastic Strain Concentration at a Crack Tip in a Ductile Steel Plate
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225045
dc.journal.fristpage115
dc.journal.lastpage120
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsOptical measurement
dc.keywordsFracture (Materials)
dc.keywordsShades and shadows
dc.keywordsStress
dc.keywordsFracture mechanics
dc.keywordsDeformation
dc.keywordsMeasurement
dc.keywordsReflection
dc.keywordsHazardous substances AND Fracture (Process)
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record