Show simple item record

dc.contributor.authorA. F. Liu
dc.contributor.authorH. P. Kan
dc.date.accessioned2017-05-08T23:13:27Z
dc.date.available2017-05-08T23:13:27Z
dc.date.copyrightApril, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26887#107_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95892
dc.description.abstractThe two-dimensional growth characteristics of corner cracks emanating from an open hole were demonstrated by conducting constant amplitude cyclic crack growth tests on a set of 51 specimens. The specimens were machined from 2024-T851 aluminum alloy in three thicknesses (6.35, 12.7, and 19.30 mm) and three hole diameters (6.35, 12.7, and 19.05 mm). The precrack sizes are very small (typically 0.5 to 1.0 mm in either length or depth dimensions) having many arbitrary initiated length-to-depth ratios. Empirical stress intensity factors for various crack size, crack shape, and specimen geometry combinations were calibrated by back-tracking of the crack growth rate behavior in these specimens and the material baseline crack growth rate data (also in three thicknesses of the same heat) developed from compact specimens. Superposition principles were applied to separate the lumped stress intensity factors into a parametric functional form. It has been demonstrated that these empirically derived stress intensity expressions are capable of predicting the crack growth behavior in both the length (on specimen surface) and depth (on the hole wall) directions.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleGrowth of Corner Cracks at a Hole
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225044
dc.journal.fristpage107
dc.journal.lastpage114
dc.identifier.eissn1528-8889
dc.keywordsFracture (Materials)
dc.keywordsCorners (Structural elements)
dc.keywordsStress
dc.keywordsHeat
dc.keywordsDimensions
dc.keywordsAluminum alloys
dc.keywordsGeometry AND Shapes
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record