Show simple item record

dc.contributor.authorÖktem Vardar
dc.date.accessioned2017-05-08T23:13:25Z
dc.date.available2017-05-08T23:13:25Z
dc.date.copyrightJuly, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26888#192_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95874
dc.description.abstractTests are carried out on compact tension specimens of AISI 1020 hot-rolled steel at nominal stress levels beyond yield. The results show that crack propagation rates can be correlated successfully using an operational definition of the range ΔJ of the J-integral. The rate of crack growth per cycle da/dN is shown to be related to ΔJ by da/dN=A (ΔJ)α for conditions ranging from linear elastic to limit load. The exponent α agrees well with other published data on low strength steels and the quantity A is found to have a weak dependence on frequency. Examination of the fracture surface reveals that static failure modes are operating at the high crack propagation rates.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue Crack Propagation Beyond General Yield
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225064
dc.journal.fristpage192
dc.journal.lastpage199
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsCrack propagation
dc.keywordsCycles
dc.keywordsFailure
dc.keywordsFatigue cracks AND Tension
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record