Show simple item record

dc.contributor.authorW. N. Findley
dc.contributor.authorR. M. Reed
dc.date.accessioned2017-05-08T23:13:25Z
dc.date.available2017-05-08T23:13:25Z
dc.date.copyrightJuly, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26888#174_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95871
dc.description.abstractExperimental results are presented for fatigue of closed-ended thick-walled tubes of 2.5 wall ratio and 32.3 mm (1.27 in.) ID for SAE 4333 steel subjected to pulsating internal pressure. Results are given for the following conditions: as-received-polished bore, stress relieved, honed with a 207 MPa (30 ksi) mean pressure, honed with a 276 MPa (40 ksi) mean pressure, nickel plated bore, roller burnished bore, and shot peened bore.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFatigue of Thick Tubes: Effect of Mean Pressure, Honing, Plating, Burnishing, and Peening
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225061
dc.journal.fristpage174
dc.journal.lastpage179
dc.identifier.eissn1528-8889
dc.keywordsPressure
dc.keywordsFatigue
dc.keywordsPlating
dc.keywordsShot peening
dc.keywordsStress
dc.keywordsPolishing
dc.keywordsRollers
dc.keywordsSteel AND Nickel plating
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record