Show simple item record

dc.contributor.authorY. Ohashi
dc.contributor.authorN. Ohno
dc.contributor.authorM. Kawai
dc.date.accessioned2017-05-08T23:13:24Z
dc.date.available2017-05-08T23:13:24Z
dc.date.copyrightJuly, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26888#159_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95869
dc.description.abstractFour kinds of creep constitutive models, i.e., strain-hardening, modified strain-hardening, kinematic-hardening, and mixed-hardening theory, are evaluated on the basis of creep-test results on type 304 stainless steel at 650°C under repeated multiaxial loading. The predictions of the four models are compared with the experimental results. It is shown that substantial differences appear among these predictions under large rotations of the principal axes of the deviatoric stress tensor, and that none of them can describe with sufficient accuracy the transient increase of strain-rate and the noncollinearity between the deviatoric stress and creep strain-rate vectors which are observed just after the stress-rotations.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEvaluation of Creep Constitutive Equations for Type 304 Stainless Steel Under Repeated Multiaxial Loading
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225059
dc.journal.fristpage159
dc.journal.lastpage164
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsConstitutive equations
dc.keywordsStainless steel
dc.keywordsStress
dc.keywordsHardening
dc.keywordsWork hardening AND Stress tensors
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record