Show simple item record

dc.contributor.authorHan C. Wu
dc.contributor.authorT. P. Wang
dc.contributor.authorM. C. Yip
dc.date.accessioned2017-05-08T23:13:24Z
dc.date.available2017-05-08T23:13:24Z
dc.date.copyrightOctober, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26889#285_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95866
dc.description.abstractAn analysis of test system misalignment is presented for dynamic tension test. Sheet type rectangular 1100-0 aluminum specimens are used for discussion. For a constant strain rate tension test, the strain rate is constant only on the neutral axis of the specimen. The lower the strain rate is, the more significant the misalignment errors become. The neutral axis will shift away from the centerline of the specimen as the plastic strain increases. But, it will reach a limit and will not completely move back to the centerline.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Test System Misalignment in the Dynamic Tension Test
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225078
dc.journal.fristpage285
dc.journal.lastpage290
dc.identifier.eissn1528-8889
dc.keywordsTension
dc.keywordsAluminum AND Errors
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record