Show simple item record

dc.contributor.authorHan C. Wu
dc.contributor.authorT. P. Wang
dc.date.accessioned2017-05-08T23:13:24Z
dc.date.available2017-05-08T23:13:24Z
dc.date.copyrightOctober, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26889#280_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95865
dc.description.abstractAn analysis of test system misalignment is presented for the creep test. Sheet type rectangular 1100-0 aluminum specimens are used for discussion. It is found that the creep strain at the geometric centerline of the specimen is different than that at the neutral axis. However, this difference in the creep strain decreases with time. Generally, the effect of misalignment decreases with creep time. Creep tests conducted with long pullrods and large initial strain level (high creep stress) will tend to minimize the effect of misalignment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Test System Misalignment in the Creep Test
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225077
dc.journal.fristpage280
dc.journal.lastpage284
dc.identifier.eissn1528-8889
dc.keywordsCreep
dc.keywordsAluminum AND Stress
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record