Show simple item record

dc.contributor.authorJ. S. Gunasekera
dc.contributor.authorJ. Havranek
dc.contributor.authorM. H. Littlejohn
dc.date.accessioned2017-05-08T23:13:24Z
dc.date.available2017-05-08T23:13:24Z
dc.date.copyrightOctober, 1982
dc.date.issued1982
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26889#274_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95864
dc.description.abstractCompressions tests on right, cylindrical steel specimens were performed in order to determine the stress-strain behavior. Lubrication was achieved by using a thin PTFE (Hostaflon) sheet on either side of the specimen. Preliminary testing with geometrically similar specimens (aspect ratio of 1.5) showed that the stress-strain relations were affected by the size of the specimen. This paper deals with the theoretical investigation and the experimental verification of this phenomenon (termed the “size effect”). It is concluded that homogeneous deformations up to large strains can be maintained by proper selection of the PTFE sheet thickness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Specimen Size on Stress-Strain Behavior in Compression
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225076
dc.journal.fristpage274
dc.journal.lastpage279
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsCompression
dc.keywordsSize effect
dc.keywordsThickness
dc.keywordsStress-strain relations
dc.keywordsTesting
dc.keywordsDeformation
dc.keywordsLubrication AND Steel
dc.treeJournal of Engineering Materials and Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record