Show simple item record

dc.contributor.authorA. L. Evans
dc.contributor.authorR. L. Reid
dc.date.accessioned2017-05-08T23:13:02Z
dc.date.available2017-05-08T23:13:02Z
dc.date.copyrightSeptember, 1982
dc.date.issued1982
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26387#205_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95672
dc.description.abstractVelocity and temperature profiles were measured in a prototype air thermosyphon permafrost protection device. This device, known as the air convection pile, consists of an 18-in. (0.46-m) outer tube containing a shorter concentric 10-in. (0.25-m) tube extending from 10 to 60 ft (3 to 18 m) into the permafrost. Measurements showed a low frequency oscillating flow in both the annulus and inner tube. Heat removal rates compared favorable with an analytical model and previous experimental results, but the annulus velocity profiles were significantly different, possibly due to the oscillation in the flow.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleHeat Transfer in an Air Thermosyphon Permafrost Protection Device
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230404
dc.journal.fristpage205
dc.journal.lastpage210
dc.identifier.eissn1528-8994
dc.keywordsOscillations
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsHeat transfer
dc.keywordsMeasurement
dc.keywordsEngineering prototypes
dc.keywordsConvection
dc.keywordsAnnulus AND Temperature profiles
dc.treeJournal of Energy Resources Technology:;1982:;volume( 104 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record