Show simple item record

dc.contributor.authorG. Maier
dc.contributor.authorA. Mazzoli
dc.contributor.authorR. Michelini
dc.contributor.authorL. Corradi
dc.date.accessioned2017-05-08T23:12:59Z
dc.date.available2017-05-08T23:12:59Z
dc.date.copyrightDecember, 1982
dc.date.issued1982
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26388#294_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95651
dc.description.abstractThe configuration of the stinger and ramps of a laying barge can be adjusted by varying the angles between adjacent segments and the arm of each support. On the basis of suitable idealizations and discretizations, a method is developed apt to optimize, for a given laying situation, the choice of the foregoing geometric parameters, alone at given tension or in association with the tensioner thrust. In the former case the function to minimize is the maximum absolute value of the bending moment in the overbend. In the latter case the thrust at the tensioner is minimized for given upper bound on the maximum stress in the overbend. The optimization procedure proposed consists of three phases and allows for unilateral contact between pipe and supports.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOptimization of Stinger Geometry for Deepsea Pipelaying
dc.typeJournal Paper
dc.journal.volume104
dc.journal.issue4
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230418
dc.journal.fristpage294
dc.journal.lastpage301
dc.identifier.eissn1528-8994
dc.keywordsOptimization
dc.keywordsGeometry
dc.keywordsThrust
dc.keywordsStress
dc.keywordsPipes AND Tension
dc.treeJournal of Energy Resources Technology:;1982:;volume( 104 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record