Show simple item record

dc.contributor.authorR. H. Bryan
dc.contributor.authorS. K. Iskander
dc.contributor.authorJ. G. Merkle
dc.contributor.authorG. D. Whitman
dc.contributor.authorP. P. Holz
dc.date.accessioned2017-05-08T23:11:59Z
dc.date.available2017-05-08T23:11:59Z
dc.date.copyrightFebruary, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28194#85_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95061
dc.description.abstractA 152-mm-thick cylindrical test vessel fabricated of A533, grade B, class 1 steel, was pressurized to failure at −23°C. The vessel contained a fatigue-sharpened notch adjacent to a half-bead weld repair that had not been stress relieved. Residual stresses and fracture toughnesses were determined before the pressure test by measurements on a prototypic weld, and fracture predictions were made by linear elastic fracture analysis. Predictions agreed well with test results, demonstrating the important influence of high residual stresses on fracture behavior.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTest of Thick Vessel with a Flaw in Residual Stress Field
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263374
dc.journal.fristpage85
dc.journal.lastpage93
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsVessels
dc.keywordsFracture (Process)
dc.keywordsResidual stresses
dc.keywordsFailure
dc.keywordsPressure
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsMeasurement AND Maintenance
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record