Show simple item record

dc.contributor.authorJ. A. Kapp
dc.contributor.authorG. A. Pflegl
dc.date.accessioned2017-05-08T23:11:59Z
dc.date.available2017-05-08T23:11:59Z
dc.date.copyrightFebruary, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28194#76_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95060
dc.description.abstractFinite element stress analysis has been performed to determine the effects of two O.D. notch configurations in a cylinder subjected to internal pressure, or containing autofrettage residual stress. The effects on the residual stresses were determined by simulating these stresses with equivilent temperature loads. The results show that the deeper of the two notch cofigurations is far more severe resulting in a maximum stress concentration factor of 6.6. The shallower notch has a maximum stress concentration factor of 3.7. An additional result is that by introducing notches in autofrettaged cylinders a significant amount of the residual stresses are relieved which indicates that smaller applied pressures can be applied before yielding occurs. The results also show that the possibility of O.D. initiated fatigue failure is greatly increased.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress Analysis of O.D. Notched Thick-Walled Cylinders Subjected to Internal Pressure or Thermal Loads
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263373
dc.journal.fristpage76
dc.journal.lastpage84
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsStress analysis (Engineering)
dc.keywordsPressure
dc.keywordsCylinders
dc.keywordsStress concentration
dc.keywordsResidual stresses
dc.keywordsFinite element analysis
dc.keywordsAutofrettage
dc.keywordsFatigue failure AND Temperature
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record