Show simple item record

dc.contributor.authorA. S. Kobayashi
dc.contributor.authorA. F. Emery
dc.contributor.authorW. J. Love
dc.contributor.authorA. Jain
dc.date.accessioned2017-05-08T23:11:57Z
dc.date.available2017-05-08T23:11:57Z
dc.date.copyrightMay, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28198#169_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95038
dc.description.abstractDynamic motion of pre-existing girth crack in an axially stressed, 18-in-dia 316 stainless steel pipe in the presence of large-scale yielding was analyzed by a finite difference shell code. A critical crack tip opening angle (CTOA) was used as a dynamic fracture criterion and the sensitivities of dynamic crack propagation to differences in CTOA, finite differences mesh sizes, initial crack sizes and initial crack bluntnesses, were analyzed numerically. Hold-off times for the onset of dynamic crack propagation nearly doubled and tripled, while terminal crack velocities decreased about 22 percent and 47percent when the CTOA was increased from 0.10 to 0.19 and to 0.30, respectively. Doubling of the axial length of the initial crack length and an overdriving condition simulated by a larger CTOA did not change the terminal crack velocity.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Sensitivity Study on Numerical Analysis of Dynamic Girth Crack Propagation
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263383
dc.journal.fristpage169
dc.journal.lastpage174
dc.identifier.eissn1528-8978
dc.keywordsNumerical analysis
dc.keywordsCrack propagation
dc.keywordsShells
dc.keywordsStainless steel
dc.keywordsPipes
dc.keywordsMotion AND Fracture (Process)
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record