Show simple item record

dc.contributor.authorJ. Morton
dc.contributor.authorP. R. Murray
dc.contributor.authorC. Ruiz
dc.date.accessioned2017-05-08T23:11:56Z
dc.date.available2017-05-08T23:11:56Z
dc.date.copyrightAugust, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28200#261_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95024
dc.description.abstractExperimental results are interpreted in the light of numerical analaysis, imperfection sensitivity and Design Codes. Two cases are discussed: spherical shells under uniform external pressure and partly filled spherical shells, supported on a continuous equatorial ring. The imperfection sensitivity associated with the first loading case leads to the selection of safety factors that depend on the actual shell stiffness. The second case, in which the load results in a biaxial tension-compression state of stress, is treated approximately in terms of a plate under biaxial load.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Buckling Design of Spherical Shells
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263400
dc.journal.fristpage261
dc.journal.lastpage266
dc.identifier.eissn1528-8978
dc.keywordsDesign
dc.keywordsBuckling
dc.keywordsSpherical shells
dc.keywordsStress
dc.keywordsSafety
dc.keywordsStiffness
dc.keywordsTension
dc.keywordsCompression
dc.keywordsExternal pressure AND Shells
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record