Show simple item record

dc.contributor.authorW. Johnson
dc.contributor.authorS. R. Reid
dc.contributor.authorS. K. Ghosh
dc.date.accessioned2017-05-08T23:11:56Z
dc.date.available2017-05-08T23:11:56Z
dc.date.copyrightAugust, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28200#255_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95022
dc.description.abstractExperiments are described in which cylindrical tubes were perforated normally at their central section. Quasi-static tests were performed using mainly square-section punches possessing pointed pyramidal heads of semi-angle 30 deg, the tubes being supported along their support generator. The dynamic tests comprised high-speed penetration of tubes using conically headed cylindrical projectiles. The equipment and experimental procedures are briefly described and results are presented showing typical punch load-penetration curves, the variation of punch load with tube length and that of a nondimensional characteristic punch load (defined later) with length-to-diameter ratio of the tubes. Typical specimens and the sequence of events during the course of a penetration process are also illustrated. The characteristics of petalling and plugging modes of failure together with those effects which are specifically dynamic in character are reported.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titlePiercing of Cylindrical Tubes
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263399
dc.journal.fristpage255
dc.journal.lastpage260
dc.identifier.eissn1528-8978
dc.keywordsStress
dc.keywordsDynamic testing (Engineering)
dc.keywordsFailure
dc.keywordsGenerators AND Projectiles
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record