Show simple item record

dc.contributor.authorV. K. Sazawal
dc.date.accessioned2017-05-08T23:11:56Z
dc.date.available2017-05-08T23:11:56Z
dc.date.copyrightNovember, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28204#380_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95015
dc.description.abstractThis paper presents the results of a comprehensive trial application of the draft structural design criteria for highly irradiated core components to a typical blanket assembly duct. The development of the criteria (proposed RDT F 9-7) is sponsored by the U.S. Department of Energy. The activity focuses on the evaluation of the criteria using a typical breeder reactor blanket assembly as a test case and is not intended for judging the adequacy of the component design. Pertinent design rules from the draft criteria are applied to the component to determine: (a) difficulties, if any, that may arise in interpretation and application of the criteria, and (b) adequacy of the criteria rules and analysis methods to address various potential failure mechanisms expected in the reactor core during service. Based on the trial application, various recommendations are made to promote further development of the criteria.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleTrial Application of the Draft Structural Design Criteria for Breeder Reactor Core Components to a Typical Blanket Assembly Duct
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263417
dc.journal.fristpage380
dc.journal.lastpage387
dc.identifier.eissn1528-8978
dc.keywordsStructural design
dc.keywordsManufacturing
dc.keywordsDucts
dc.keywordsBreeder reactors
dc.keywordsDesign AND Failure mechanisms
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record