Show simple item record

dc.contributor.authorG. M. Wilkowski
dc.contributor.authorA. Zahoor
dc.contributor.authorM. F. Kanninen
dc.date.accessioned2017-05-08T23:11:55Z
dc.date.available2017-05-08T23:11:55Z
dc.date.copyrightNovember, 1981
dc.date.issued1981
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28204#359_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/95011
dc.description.abstractThe possibility of a pipe fracture emanating from a stress corrosion crack in the heat-affected zones of girth-welds in Type 304 stainless steel pipes was investigated. The J-resistance curve—tearing modulus parameter for the prediction of crack initiation, stable growth and fracture instability—was employed. To evaluate the analysis, a pipe fracture experiment was performed using a spring-loaded four-point bending system that simulated an 8.8-m (29-ft) long section of unsupported 102-mm- (4-in-) dia pipe. An initial through-wall crack of length equal to 104 mm (4.1 in.) was used. Fracture instability was predicted to occur between 15.2 and 22.1 mm (0.60 and 0.87 in.) of stable crack growth at each tip. In the actual experiment, the onset of fracture instability occurred beyond maximum load at an average stable crack growth of 11.7 to 19 mm (0.463 to 0.750 in.) at each tip.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Plastic Fracture Mechanics Prediction of Fracture Instability in a Circumferentially Cracked Pipe in Bending—Part II: Experimental Verification on a Type 304 Stainless Steel Pipe
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263414
dc.journal.fristpage359
dc.journal.lastpage365
dc.identifier.eissn1528-8978
dc.keywordsFracture mechanics
dc.keywordsFracture (Process)
dc.keywordsPipes
dc.keywordsStainless steel
dc.keywordsSprings
dc.keywordsHeat
dc.keywordsElectrical resistance
dc.keywordsStress corrosion cracking
dc.keywordsStress AND Welded joints
dc.treeJournal of Pressure Vessel Technology:;1981:;volume( 103 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record