Show simple item record

dc.contributor.authorP. P. Pizzo
dc.contributor.authorG. L. Mandurrago
dc.date.accessioned2017-05-08T23:11:17Z
dc.date.available2017-05-08T23:11:17Z
dc.date.copyrightJanuary, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26880#62_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94651
dc.description.abstractThe short-term age softening characteristics of isothermal annealed and post weld heat treated 2-1/4Cr-1Mo steel have been investigated over the temperature range 454 to 727°C (850 to 1340°F). Significant degradation in flow strength is observed for times and temperatures within the current service regime of the commercial alloy. Age softening is atypical: flow strength degradation is most rapid at some intermediate temperature. The reduction in flow strength is greatest, and occurs most rapidly, at 575°C (1067°F). The strength degradation is attributed to time-dependent redistribution of molybdenum within the proeutectoid ferrite. It is predicted that thermal aging in the temperature range 427 to 593°C (800 to 1000°F) will result in similar strength decrements for annealed 2-1/4Cr-1Mo steel regardless of prior thermal history above 704°C (1300°F).
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAge Softening Characteristics of Annealed 2-1/4Cr-1Mo Steel in the Temperature Range 424 to 704°C
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224973
dc.journal.fristpage62
dc.journal.lastpage70
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsSteel
dc.keywordsFlow (Dynamics)
dc.keywordsHeat
dc.keywordsAlloys
dc.keywordsFerrites (Magnetic materials) AND molybdenum
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record