Show simple item record

dc.contributor.authorAkram Zahoor
dc.contributor.authorPaul C. Paris
dc.date.accessioned2017-05-08T23:11:17Z
dc.date.available2017-05-08T23:11:17Z
dc.date.copyrightJanuary, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26880#46_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94649
dc.description.abstractAn analysis for crack instability in an elastic-plastic strain hardening material is presented which utilizes the J-integral and the tearing modulus parameter, T. A center-cracked panel of finite dimensions with Ramberg-Osgood material representation is analyzed for plane stress as well as plane strain. The analysis is applicable in the entire range of elastic-plastic loading from linear elastic to full yield. Crack instability is strongly influenced by the elastic compliance of the system, the conditions of plane stress or plane strain, and the hardening characteristics of the material. Numerical results indicate that if crack stability is ensured in a plane strain situation, then under the same circumstances a geometrically identical but plane stress panel will be stable.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDuctile Tearing Instability of a Center-Cracked Panel of an Elastic-Plastic Strain Hardening Material
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224971
dc.journal.fristpage46
dc.journal.lastpage54
dc.identifier.eissn1528-8889
dc.keywordsWork hardening
dc.keywordsFracture (Materials)
dc.keywordsPlane strain
dc.keywordsStress
dc.keywordsHardening
dc.keywordsStability AND Dimensions
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record