Show simple item record

dc.contributor.authorF. Matanzo
dc.contributor.authorJ. T. Metcalf
dc.date.accessioned2017-05-08T23:11:16Z
dc.date.available2017-05-08T23:11:16Z
dc.date.copyrightApril, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26881#164_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94635
dc.description.abstractNine wire rope terminations were evaluated with respect to true efficiency, service life, and sensitivity to poor workmanship in a comprehensive laboratory test program. The portion of the program concerned with true efficiency, as determined by pull tests to destruction, is reported here. Five diameter values of Lang and Regular construction ropes of the 6 × 19 and 6 × 37 class were used on the following wire rope terminations: Flemish Loop with Steel Sleeve and Thimble, Flemish Loop with Steel Sleeve, Wedge Socket, Swaged Socket, Turn Back Loop with Aluminum Sleeve and Thimble, Thimble Splice with Four Tucks, U-Bolt Clips with Thimble, Zinc Poured Socket, and Resin Poured Socket. The true efficiency was shown to be affected by termination type, rope type, and the interaction of these factors. The efficiency values measured in this test program are less than those reported in the literature which are based on the catalog breaking load rather than on the true breaking load. From a graphic and statistical analysis of the data it was possible to present a selection procedure for optimizing the efficiency.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEfficiency of Wire Rope Terminations
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224989
dc.journal.fristpage164
dc.journal.lastpage170
dc.identifier.eissn1528-8889
dc.keywordsWire
dc.keywordsRopes
dc.keywordsStress
dc.keywordsSteel
dc.keywordsAluminum
dc.keywordsConstruction
dc.keywordsService life (Equipment)
dc.keywordsResins
dc.keywordsStatistical analysis AND Wedges
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record