Show simple item record

dc.contributor.authorS. Ramalingam
dc.contributor.authorP. K. Wright
dc.date.accessioned2017-05-08T23:11:16Z
dc.date.available2017-05-08T23:11:16Z
dc.date.copyrightApril, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26881#151_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94632
dc.description.abstractEvidence is presented to show that hard inclusions in iron-base alloys degrade machinability by reducing cutting tool life. Machining experiments have been carried out on Fe-C-Silica and Fe-C-Alumina powder metal compacts containing varying amounts of abrasive. In addition, two stainless steels have been compared. One of these was titanium stabilized hence containing hard TiC particles; the other was unstabilized and free of such particles. In all these experiments the tool wear rate increased with volume fraction of hard inclusions. Abrasive wear mechanisms have been identified using detailed metallography. When machining with high-speed steels, rake face wear by abrasion occurs by a plastic plowing process and this is enhanced if the tool is thermally weakened. When machining with cemented carbide tools the results indicate that the temperatures in the crater region are high enough for the same plastic plowing of tool material to occur. By contrast, temperatures at the flank face are 300–400°C lower and the wear processes are of a different nature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAbrasive Wear in Machining: Experiments With Materials of Controlled Microstructure
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224987
dc.journal.fristpage151
dc.journal.lastpage156
dc.identifier.eissn1528-8889
dc.keywordsWear
dc.keywordsMachining
dc.keywordsTemperature
dc.keywordsParticulate matter
dc.keywordsMetallography
dc.keywordsCarbide cutting tools
dc.keywordsCutting tools
dc.keywordsAbrasion
dc.keywordsIron
dc.keywordsMachinability
dc.keywordsStainless steel
dc.keywordsTitanium
dc.keywordsMechanisms
dc.keywordsMetals
dc.keywordsAlloys AND Steel
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record