Show simple item record

dc.contributor.authorE. Smith
dc.date.accessioned2017-05-08T23:11:16Z
dc.date.available2017-05-08T23:11:16Z
dc.date.copyrightApril, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26881#148_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94631
dc.description.abstractThe equivalence of the final stretch and crack tip opening angle criteria, as applied to the Dugdale-Bilby-Cottrell-Swinden type model for Mode I plane strain crack growth, is demonstrated. This equivalence is independent of the plastic zone size, geometrical parameters, and the stress distribution within the fracture process zone, if the yield stress is sufficiently low and the crack growth resistance is sufficiently high. The results therefore provide further support for the viability of crack tip opening angle as a crack growth characterizing parameter.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Equivalence of the Final Stretch and Crack Tip Opening Angle Criteria for Plane Strain Crack Growth
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224986
dc.journal.fristpage148
dc.journal.lastpage150
dc.identifier.eissn1528-8889
dc.keywordsFracture (Materials)
dc.keywordsPlane strain
dc.keywordsYield stress
dc.keywordsFracture (Process)
dc.keywordsElectrical resistance AND Stress concentration
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record