Show simple item record

dc.contributor.authorD. F. Mowbray
dc.contributor.authorE. V. Giaquinto
dc.contributor.authorF. J. Mehringer
dc.date.accessioned2017-05-08T23:11:16Z
dc.date.available2017-05-08T23:11:16Z
dc.date.copyrightApril, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26881#126_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94628
dc.description.abstractThis paper reports the results of fatigue tests on two nickel-base alloys, hot-cold-worked and stress-relieved nickel-chrome-iron Alloy 600 and mill-annealed nickel-chrome-moly-iron Alloy 625 in which S-N data were obtained in the life range of 106 to 1010 cycles. The tests were conducted in air at 600°F, in the reversed membrane loading mode, at a frequency of ~ 1850 Hz. An electromagnetic, closed loop servo-controlled machine was built to perform the tests. A description of the machine is given.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleLong-Life Fatigue Test Results for Two Nickel-Base Structural Alloys
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224983
dc.journal.fristpage126
dc.journal.lastpage132
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsNickel
dc.keywordsFatigue testing
dc.keywordsIron
dc.keywordsMachinery
dc.keywordsMembranes
dc.keywordsServomechanisms
dc.keywordsStress AND Cycles
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record