Show simple item record

dc.contributor.authorA. M. Ermi
dc.contributor.authorR. E. Bauer
dc.contributor.authorB. A. Chin
dc.contributor.authorJ. L. Straalsund
dc.date.accessioned2017-05-08T23:11:15Z
dc.date.available2017-05-08T23:11:15Z
dc.date.copyrightJuly, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26883#240_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94615
dc.description.abstractChains of miniature center-cracked-tension specimens were tested on a conventional testing machine and on a prototypic in-reactor fatigue machine as part of the fusion reactor materials alloy development program. Annealed and 20 percent cold-worked 316 stainless steel specimens were cycled under various conditions of temperature, frequency, stress ratio and chain length. Crack growth rates determined from multispecimen visual measurements and from an electrical potential technique were consistent with those obtained by conventional test methods. Results demonstrate that multispecimen chain testing is a valid method of obtaining fatigue crack propagation information for alloy development.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMultispecimen Fatigue Crack Propagation Testing
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225008
dc.journal.fristpage240
dc.journal.lastpage245
dc.identifier.eissn1528-8889
dc.keywordsTesting
dc.keywordsFatigue cracks
dc.keywordsChain
dc.keywordsMachinery
dc.keywordsAlloys
dc.keywordsMeasurement
dc.keywordsStress
dc.keywordsFracture (Materials)
dc.keywordsFusion reactor materials
dc.keywordsStainless steel
dc.keywordsTension
dc.keywordsFatigue
dc.keywordsTemperature AND Electric potential
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record