Show simple item record

dc.contributor.authorA. Kantimathi
dc.contributor.authorJ. A. Alic
dc.date.accessioned2017-05-08T23:11:14Z
dc.date.available2017-05-08T23:11:14Z
dc.date.copyrightJuly, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26883#223_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94610
dc.description.abstractFretting fatigue tests have been conducted on 7075-T7351 aluminum alloy coupons with fretting pads of the same material. Three different stress ratios were used, the otherwise constant amplitude axial loads being interrupted every 1000 cycles by either tensile overloads to 400 MPa or compressive underloads to −200 MPa. Tensile overloads greatly prolonged fatigue life for low stresses where the overload ratios were 1.6 and above; compressive underloads had comparatively little effect. The results are discussed in terms of crack growth retardation phenomena.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Periodic High Loads on Fretting Fatigue
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225005
dc.journal.fristpage223
dc.journal.lastpage228
dc.identifier.eissn1528-8889
dc.keywordsStress
dc.keywordsFatigue
dc.keywordsAluminum alloys
dc.keywordsFracture (Materials)
dc.keywordsCycles
dc.keywordsFatigue life AND Fatigue testing
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record