Show simple item record

dc.contributor.authorE. G. Thomsen
dc.contributor.authorJ. T. Holthuis
dc.contributor.authorH. H. Thomsen
dc.date.accessioned2017-05-08T23:11:14Z
dc.date.available2017-05-08T23:11:14Z
dc.date.copyrightJuly, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26883#188_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94604
dc.description.abstractThe tensile properties of annealed OFHC copper and SAE 1018 steel drawn to various prestrains up to ln A0 /A ≅ 1.5 were evaluated. It was found that the resulting Bridgman corrected curves could not be matched at the calculated prestrains. However, a match could be achieved by ignoring the calculated or theoretical prestrains. This method of obtaining a unified curve leads to the belief that the two materials under investigation soften at the higher prestrains. For the moment there appears to be no method to predict the softening effects. It was found that the yield strengths fall below the unified true stress-true strain or flow stress curves and that necking appears to be in agreement with the theory. Consequently, necking strains in tension drop to nearly zero after the first drawing pass.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFlow Stresses of Prestrained Annealed OFHC Copper and SAE 1018 Steel
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224999
dc.journal.fristpage188
dc.journal.lastpage193
dc.identifier.eissn1528-8889
dc.keywordsFlow (Dynamics)
dc.keywordsCopper
dc.keywordsSteel
dc.keywordsStress
dc.keywordsNecking
dc.keywordsTension AND Drops
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record