Show simple item record

dc.contributor.authorM. S. Jackson
dc.contributor.authorC. W. Cho
dc.contributor.authorP. Alexopoulos
dc.contributor.authorChe-Yu Li
dc.date.accessioned2017-05-08T23:11:13Z
dc.date.available2017-05-08T23:11:13Z
dc.date.copyrightOctober, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26884#314_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94597
dc.description.abstractThe state variable theory of Hart, while providing a unified description of plasticity-dominated deformation, exhibits deficiencies when it is applied to transient deformation phenomena at stresses below macroplastic yielding. It appears that the description of stored anelastic strain is oversimplified. Consideration of a simple physical picture based on continuum dislocation pileups suggests that the neglect of weak barriers to dislocation motion is the source of these inadequacies. An appropriately modified description incorporating such barriers allows the construction of a modified phenomenological model including transient effects. The applicability of the modified model to aluminum has been investigated at room temperature. A consistent set of parameters describing the mechanical properties of the material has been determined experimentally. Agreement between experiment and model predictions for fairly complex loading histories is good. Although the constitutive equations for microplastic flow could not be established unambiguously, the results indicate that the general structure of the transient deformation model represents the deformation properties well.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleA Phenomenological Model for Transient Deformation Based on State Variables
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225022
dc.journal.fristpage314
dc.journal.lastpage325
dc.identifier.eissn1528-8889
dc.keywordsDeformation
dc.keywordsTemperature
dc.keywordsAluminum
dc.keywordsConstruction
dc.keywordsStress
dc.keywordsMechanical properties
dc.keywordsConstitutive equations
dc.keywordsDislocation motion
dc.keywordsDislocations
dc.keywordsFlow (Dynamics) AND Plasticity
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record