Show simple item record

dc.contributor.authorH. Sasaki
dc.contributor.authorY. Sato
dc.date.accessioned2017-05-08T23:11:13Z
dc.date.available2017-05-08T23:11:13Z
dc.date.copyrightOctober, 1981
dc.date.issued1981
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26884#282_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94592
dc.description.abstractThe load-strain curves of thin-walled hollow cylinders of mild steel under compression, bending or torsion and rectangular cross-sectional beams with small height under bending deviate from the elastic line before reaching the lower yield point. In this paper these experimental results are attributed to yielding of the surface layer of the material. It is concluded that the surface yeild stress is 3/4 of the inherent yield stress of bulk material under uniform stress such as simple tension or compression.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStrength of the Surface Layer of Mild Steel
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3225017
dc.journal.fristpage282
dc.journal.lastpage286
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsStress
dc.keywordsCompression
dc.keywordsCylinders
dc.keywordsTension
dc.keywordsYield point
dc.keywordsYield stress
dc.keywordsBulk solids AND Torsion
dc.treeJournal of Engineering Materials and Technology:;1981:;volume( 103 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record