Show simple item record

dc.contributor.authorP. J. Hommert
dc.contributor.authorC. E. Tyner
dc.date.accessioned2017-05-08T23:10:54Z
dc.date.available2017-05-08T23:10:54Z
dc.date.copyrightJune, 1981
dc.date.issued1981
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26382#138_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94432
dc.description.abstractThe extensive oil shale reserves of the United States are now under development as an energy source. One of the approaches for extracting oil from shale is the so-called modified in-situ retort. The operation of such retorts for maximum yield requires an understanding of oil loss mechanisms so that operating strategies that minimize these losses can be developed. The present modeling capabilities for describing the behavior and yield from a modified in-situ retort are discussed. Two models that have been subject to comparison with laboratory retorts are described. The first is a one-dimensional model that treats the retort as a packed bed reactor; the second is a quasi-two-dimensional examination of block retorting. Both models are capable of predicting retorting rates, off-gas composition and oil yield losses to coking and combustion. The major need for modeling now is expansion to multi-dimensional simulation.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleModel Capabilities for In-Situ Oil Shale Recovery
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue2
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230826
dc.journal.fristpage138
dc.journal.lastpage146
dc.identifier.eissn1528-8994
dc.keywordsCombustion
dc.keywordsSimulation
dc.keywordsModeling AND Mechanisms
dc.treeJournal of Energy Resources Technology:;1981:;volume( 103 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record