Show simple item record

dc.contributor.authorS. L. Collier
dc.contributor.authorC. C. Hoerner
dc.date.accessioned2017-05-08T23:10:52Z
dc.date.available2017-05-08T23:10:52Z
dc.date.copyrightSeptember, 1981
dc.date.issued1981
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26383#196_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/94417
dc.description.abstractThe moving element in a check valve assumes positions depending on flow which makes modeling more complicated than that of fixed geometry devices. Thus, it is necessary to determine the force on the plate to predict the equivalent in larger valves which may be inconvenient to build and test at full scale. Test data is obtained and affinity relations developed for scaling the resistance to flow, torque, and position. An example of the complete procedure for a geometrically similar valve is provided showing the test torque at several fixed angles and the prediction of the pressure loss and plate angles in a much larger valve, together with field data confirming the results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Affinity Relations for Modeling Characteristics of Check Valves
dc.typeJournal Paper
dc.journal.volume103
dc.journal.issue3
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3230836
dc.journal.fristpage196
dc.journal.lastpage200
dc.identifier.eissn1528-8994
dc.keywordsModeling
dc.keywordsValves
dc.keywordsTorque
dc.keywordsFlow (Dynamics)
dc.keywordsElectrical resistance
dc.keywordsPressure
dc.keywordsGeometry AND Force
dc.treeJournal of Energy Resources Technology:;1981:;volume( 103 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record