Show simple item record

dc.contributor.authorH. Abé
dc.contributor.authorM. Ogiwara
dc.date.accessioned2017-05-08T23:09:46Z
dc.date.available2017-05-08T23:09:46Z
dc.date.copyrightFebruary, 1980
dc.date.issued1980
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28180#8_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93806
dc.description.abstractThe bending of a clamped circular plate containing a surface crack along its edge is discussed. An approximate method of solution, which is based on the classical plate theory, is proposed to obtain the asymptotic behavior of bending stresses along the tip of the crack. The flexural rigidity of the plate is reduced by the crack. The distribution of bending stresses is therefore changed. A plate of nonuniform thickness is introduced which has the equivalent of the flexural rigidity of the cracked plate under consideration. The bending stress intensity factor is evaluated with the aid of the equivalent plate. It is found that the stress intensity factor increases with the crack depth for shallow cracks, and it decreases when the depth exceeds a certain value.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleSurface Crack in a Clamped Circular Plate Subjected to Uniform Lateral Pressure
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263307
dc.journal.fristpage8
dc.journal.lastpage13
dc.identifier.eissn1528-8978
dc.keywordsPressure
dc.keywordsSurface cracks
dc.keywordsFracture (Materials)
dc.keywordsBending (Stress)
dc.keywordsStiffness
dc.keywordsStress AND Thickness
dc.treeJournal of Pressure Vessel Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record