Show simple item record

dc.contributor.authorA. I. Soler
dc.date.accessioned2017-05-08T23:09:42Z
dc.date.available2017-05-08T23:09:42Z
dc.date.copyrightAugust, 1980
dc.date.issued1980
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28187#249_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93773
dc.description.abstractDesign methods for full face gaskets in bolted pressure vessel joints have received little attention in the literature. Such gasketed joints play a prominent role in attaching rectangular plan from water boxes to rectangular tubesheets in condenser water boxes. With higher cooling water pressures becoming evident due to cooling tower circuits, the water box-tubesheet structure, and its bolted joint connection requires rigorous analysis for both structural integrity and leak tightness. Although it is well known that gasket material has a highly nonlinear stress strain behavior, very few analyses are available to calculate and evaluate the effect of the nonlinear gasket behavior in a bolted joint connection. In this paper, an approximate method for simultaneously analyzing structural integrity and leak tightness of typical bolted flange connections with nonlinear gasket material is developed. The flange is modeled as an elastic element, the bolt is simulated by a linear spring with bending and extensional resistance, and the gasket is modeled by a series of nonlinear compression springs. A simple nonlinear stress-strain relation for initial loading and unloading of the gasket is developed based on experimental data. The analysis technique employs an incremental procedure which follows the configuration through preloading and pressurization and checks structural integrity and gasket leakage. To illustrate the method, a typical full face gasket and flange construction is studied, and the effect of gasket properties on the final state is investigated. A series of simulation results are obtained which illustrate clearly the effect of gasket prestrain, undersizing of bolts, and wall rotational resistance. Of particular importance is a simulation comparing results obtained using actual nonlinear gasket stress-strain data with results obtained using linear models for the gasket. It is demonstrated that for full face gasket configurations, simulation of the nonlinear behavior is required to achieve accurate results. The procedure developed in this work is ideal for optimization of flange gasket configurations because of its cost effectiveness while simultaneously evaluating the interaction between structural integrity and joint leak tightness.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleAnalysis of Bolted Joints with Nonlinear Gasket Behavior
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue3
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263328
dc.journal.fristpage249
dc.journal.lastpage256
dc.identifier.eissn1528-8978
dc.keywordsGaskets
dc.keywordsBolted joints
dc.keywordsLeakage
dc.keywordsWater
dc.keywordsFlanges
dc.keywordsElectrical resistance
dc.keywordsSimulation
dc.keywordsStress
dc.keywordsSprings
dc.keywordsConstruction
dc.keywordsPressure vessels
dc.keywordsCooling
dc.keywordsWater pressure
dc.keywordsDesign methodology
dc.keywordsOptimization
dc.keywordsStress-strain relations
dc.keywordsBolted flanges
dc.keywordsCircuits
dc.keywordsCompression
dc.keywordsCondensers (steam plant)
dc.keywordsCooling towers AND Simulation results
dc.treeJournal of Pressure Vessel Technology:;1980:;volume( 102 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record