Show simple item record

dc.contributor.authorJ. C. Newman
dc.contributor.authorI. S. Raju
dc.date.accessioned2017-05-08T23:09:37Z
dc.date.available2017-05-08T23:09:37Z
dc.date.copyrightNovember, 1980
dc.date.issued1980
dc.identifier.issn0094-9930
dc.identifier.otherJPVTAS-28192#342_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93759
dc.description.abstractThe purpose of this paper is to present stress-intensity factors for a wide range of semi-elliptical surface cracks on the inside of pressurized cylinders. The ratio of crack depth to crack length ranged from 0.2 to 1; the ratio of crack depth to wall thickness ranged from 0.2 to 0.8; and the ratio of wall thickness to vessel radius was 0.1 to 0.25. The stress-intensity factors were calculated by a three-dimensional finite-element method. The finite-element models employ singularity elements along the crack front and linear-strain elements elsewhere. The models had about 6500 degrees of freedom. The stress-intensity factors were evaluated from a nodal-force method. An equation for the stress-intensity factors was obtained from the results of the present analysis. The equation applies over a wide range of configuration parameters and was within about 5 percent of the present results. A comparison was also made between the present results and other analyses of internal surface cracks in cylinders. The results from a boundary-integral equation method were in good agreement (± 2 percent) and those from another finite-element method were in fair agreement (± 8 percent) with the present results.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleStress-Intensity Factors for Internal Surface Cracks in Cylindrical Pressure Vessels
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue4
dc.journal.titleJournal of Pressure Vessel Technology
dc.identifier.doi10.1115/1.3263343
dc.journal.fristpage342
dc.journal.lastpage346
dc.identifier.eissn1528-8978
dc.keywordsPressure vessels
dc.keywordsStress
dc.keywordsSurface cracks
dc.keywordsFracture (Materials)
dc.keywordsEquations
dc.keywordsCylinders
dc.keywordsFinite element methods
dc.keywordsWall thickness
dc.keywordsVessels
dc.keywordsDegrees of freedom
dc.keywordsForce AND Finite element model
dc.treeJournal of Pressure Vessel Technology:;1980:;volume( 102 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record