Show simple item record

dc.contributor.authorW. J. Mills
dc.date.accessioned2017-05-08T23:08:56Z
dc.date.available2017-05-08T23:08:56Z
dc.date.copyrightJanuary, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26874#118_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93407
dc.description.abstractThe effect of heat treatment on the JIC fracture toughness behavior of Alloy 718 was characterized at room temperature, 427°C and 538°C. Two different heat treatments were used: the conventional (ASTM A637) treatment, and a modified heat treatment designed to improve the toughness of Alloy 718 base metal and weldments. The elastic-plastic JIC fracture toughness response of the modified Alloy 718 was found to be superior to the JIC behavior exhibited by the conventional material over the entire test temperature range. Metallographic and fractographic examinations of Alloy 718 fracture surfaces revealed that the inferior fracture resistance of the conventional superalloy was attributed to the presence of coarse δ precipitates throughout the conventional matrix. The increased fracture toughness response of the modified Alloy 718 was related to the dissolution of coarse δ precipitates during the high temperature solution anneal employed in the modified treatment.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effect of Heat Treatment on the Room Temperature and Elevated Temperature Fracture Toughness Response of Alloy 718
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224768
dc.journal.fristpage118
dc.journal.lastpage126
dc.identifier.eissn1528-8889
dc.keywordsTemperature
dc.keywordsAlloys
dc.keywordsHeat treating (Metalworking)
dc.keywordsFracture toughness
dc.keywordsFracture (Process)
dc.keywordsFractography
dc.keywordsBase metals
dc.keywordsSuperalloys
dc.keywordsElectrical resistance
dc.keywordsToughness
dc.keywordsHigh temperature
dc.keywordsASTM International AND Heat
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record