Show simple item record

dc.contributor.authorW. Oldfield
dc.date.accessioned2017-05-08T23:08:56Z
dc.date.available2017-05-08T23:08:56Z
dc.date.copyrightJanuary, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26874#107_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93406
dc.description.abstractA large base of KIC , KId and JIC (R-curve) fracture toughness data has been used to develop reference toughness curves. The most successful results were obtained when a sigmoidal function was fitted to data from which the heat-heat variation in both the temperature and fracture toughness had been reduced by referencing. Several referencing procedures have been studied, but the only one found to be ‘successful in this work was based upon the precracked instrumented Charpy V-notch test. The tanh function K = A + B tanhT − T0C (K = toughness, T = temperature, and A, B, T0 and C are coefficients which give the best fit between curve and data) fitted to precracked instrumented Charpy V-notch test data provided suitable referencing quantities. Using the coefficients A and B to reference fracture toughness, and T0 and C to reference temperature, lower bound reference curves were developed. Weighted, nonlinear regression procedures were used to define lower bound reference toughness curves for each of three stress intensification rates. The lower bound was the statistical global tolerance bound to the referenced data. The reference curves can be readily used to define a lower bound relationship between fracture toughness and temperature for nuclear pressure vessel steel on the basis of a set of precracked instrumented Charpy V-notch tests.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleDevelopment of Fracture Toughness Reference Curves
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224767
dc.journal.fristpage107
dc.journal.lastpage117
dc.identifier.eissn1528-8889
dc.keywordsFracture toughness
dc.keywordsTemperature
dc.keywordsToughness
dc.keywordsHeat
dc.keywordsReactor vessels
dc.keywordsSteel AND Stress
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record