Show simple item record

dc.contributor.authorR. A. Wullaert
dc.contributor.authorW. Oldfield
dc.contributor.authorW. L. Server
dc.date.accessioned2017-05-08T23:08:56Z
dc.date.available2017-05-08T23:08:56Z
dc.date.copyrightJanuary, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26874#101_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93405
dc.description.abstractRecently developed statistically-based fracture toughness reference curve procedures (Charpy V-notch and precracked Charpy methods) have been applied to unirradiated and irradiated plate and weld material from the HSST program and the Maine Yankee reactor surveillance program. The results have been compared to the reference procedure based upon the ASME Code and NRC regulations (KIR curve) and to actual measurements of fracture toughness. It was found that the fracture toughness measurements were closely grouped around the mean property curve predicted by the Charpy V-notch method. The bounds for each method were similar for HSST Plate 02, but differed considerably for the Maine Yankee material. It was found that the KIR approach overstated the shift in the temperature of the property transition for the Maine Yankee reactor material. However, the low temperature fracture toughness was predicted to be lower than predicted by the KIR approach. These conclusions are subject to some reservations because of the poor quality of some of the referencing data, and because the precracked Charpy and Charpy V-notch reference curve procedures are still being developed and tested. Reasons for the differences between the current KIR method as compared to the proposed new methods have been traced to shortcomings in current procedures.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleReference Fracture Toughness Curves for Irradiated Pressure Vessel Steels
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224766
dc.journal.fristpage101
dc.journal.lastpage106
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsPressure vessels
dc.keywordsFracture toughness
dc.keywordsMeasurement
dc.keywordsLow temperature
dc.keywordsRegulations
dc.keywordsSurveillance
dc.keywordsASME Standards AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record