Show simple item record

dc.contributor.authorDeo Nath
dc.contributor.authorR. T. Bhatt
dc.contributor.authorS. K. Biswas
dc.contributor.authorP. K. Rohatgi
dc.date.accessioned2017-05-08T23:08:55Z
dc.date.available2017-05-08T23:08:55Z
dc.date.copyrightJanuary, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26874#78_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93400
dc.description.abstractCast aluminium alloy mica particle composites of varying mica content were tested in tension, compression, and impact. With 2.2 percent mica (size range 40μm – 120μm) the tensile and compression strengths of aluminium alloy decreased by 56 and 22 percent, respectively. The corresponding decreases in percent elongation and percent reduction are 49 and 39 percent. Previous work [2] shows that despite this decrease in strength the composite with 2.5 percent mica and having an UTS of 15 kg/mm2 and compression strength of 28 kg/mm2 performs well as a bearing material under severe running conditions. The differences in strength characteristics of cast aluminium-mica particle composites between tension and compression suggests that, as in cast iron, expansion of voids at the matrix particle interface may be the guiding mechanism of the deformation. SEM studies show that on the tensile fractured specimen surface, there are large voids at the particle matrix interface.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMechanical Properties of Al-Mica Particulate Composite Material
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224788
dc.journal.fristpage78
dc.journal.lastpage84
dc.identifier.eissn1528-8889
dc.keywordsComposite materials
dc.keywordsParticulate matter
dc.keywordsMechanical properties
dc.keywordsCompression
dc.keywordsTension
dc.keywordsAluminum alloys
dc.keywordsCast iron
dc.keywordsCompressive strength
dc.keywordsBearings
dc.keywordsElongation
dc.keywordsMechanisms
dc.keywordsTensile strength
dc.keywordsDeformation AND Aluminum
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record