Show simple item record

dc.contributor.authorK. S. Cho
dc.contributor.authorC. O. Lee
dc.date.accessioned2017-05-08T23:08:53Z
dc.date.available2017-05-08T23:08:53Z
dc.date.copyrightApril, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26875#229_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93383
dc.description.abstractThis paper deals with ion-nitride processing and is primarily concerned with the effects of carbon content in the workpiece and of added carbon in the gas atmosphere on hardness, compound layer thickness, and diffusion layer thickness. Increased carbon content in the workpiece increases the compound layer thickness, but decreases the diffusion layer thickness. On the other hand, an optimal amount of added carbon in the gas atmosphere will increase the compound layer thickness as well as the diffusion layer thickness and hardness. It is found that the ion-nitriding temperature at which maximum hardness is attained is governed by the ion-nitriding time. When the treatment time is made sufficiently long, the maximum hardness is obtained at a temperature near 450°C.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Effects of Carbon on Ion-Nitriding
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224802
dc.journal.fristpage229
dc.journal.lastpage233
dc.identifier.eissn1528-8889
dc.keywordsNitriding
dc.keywordsCarbon
dc.keywordsThickness
dc.keywordsDiffusion (Physics) AND Temperature
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record