Show simple item record

dc.contributor.authorW. L. Server
dc.contributor.authorR. O. Ritchie
dc.contributor.authorR. A. Wullaert
dc.date.accessioned2017-05-08T23:08:52Z
dc.date.available2017-05-08T23:08:52Z
dc.date.copyrightApril, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26875#192_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93377
dc.description.abstractThe problem of obtaining a meaningful value of toughness from small Charpy-size surveillance specimens, tested at temperature corresponding to the upper shelf where ductile fracture predominates, is investigated. Following the procedures of Green and Knott for measurement of crack opening displacements at initiation of ductile fracture, a test procedure is adopted in which small precracked Charpy-size bend specimens are side-grooved to increasing depths and tested to failure under both quasi-static and dynamic loading rates. Values of the J-contour integral at maximum load (Jmax ) for specimens side-grooved in excess of 30 percent are found to agree, within acceptable limits, with “valid” initiation JIc fracture toughness values determined independently using multi-specimen resistance-curve techniques. Three nuclear pressure vessel materials (two base metals, SA533B-1 and SA302B, and a submerged arc weld metal) were evaluated at temperatures between 71 and 177° C, which correspond to upper shelf temperatures. The test procedure described offers a simple, inexpensive, small specimen compromise for estimating the fracture toughness at the onset of ductile fracture from a single Charpy-size bend test piece for both quasi-static and dynamic loading rates. This approach could be readily adopted in nuclear surveillance programs for toughness evaluation of unirradiated and neutron irradiated pressure vessel steels.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleOn the Use of Side-Grooves in Estimating JIc Fracture Toughness With Charpy-Size Specimens
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue2
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224796
dc.journal.fristpage192
dc.journal.lastpage199
dc.identifier.eissn1528-8889
dc.keywordsFracture toughness
dc.keywordsDuctile fracture
dc.keywordsTemperature
dc.keywordsSurveillance
dc.keywordsToughness
dc.keywordsDynamic testing (Materials)
dc.keywordsFracture (Materials)
dc.keywordsFailure
dc.keywordsReactor vessels
dc.keywordsNeutrons
dc.keywordsMetals
dc.keywordsSteel
dc.keywordsElectrical resistance
dc.keywordsPressure vessels
dc.keywordsStress AND Base metals
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record