Show simple item record

dc.contributor.authorJ. G. Kaufman
dc.contributor.authorR. J. Bucci
dc.contributor.authorR. A. Kelsey
dc.date.accessioned2017-05-08T23:08:52Z
dc.date.available2017-05-08T23:08:52Z
dc.date.copyrightJuly, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26878#303_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93370
dc.description.abstractThe Kvaerner-Moss spherical tank design offers significant economic advantage for the shipboard transport of liquefied natural gas. An analytical and experimental approach based on fracture mechanics concepts was used to assist the designer in providing answers to the following basic questions: (1) Might a discontinuity smaller than detectable by nondestructive inspection lead to catastrophic fracture; (2) How fast would such a discontinuity grow under fatigue loading likely to occur during the lifetime of the tank; (3) Could a fatigue crack growing part way through the tank wall precipitate catastrophic fracture before it grows through the wall and is detected as a leak; and (4) If leakage develops, how much time is available to get the ship safely to port for discharge and repair? Both “critical” locations in the tank, i.e., the highest stressed region of the membrane and the equatorial ring, are examined. Available data indicating the safety of spherical tanks fabricated of aluminum alloy 5083-0 is documented.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Mechanics Aspects of the Structural Integrity Technology of Spherical Aluminum Containment Vessels for LNG Tankers
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224816
dc.journal.fristpage303
dc.journal.lastpage314
dc.identifier.eissn1528-8889
dc.keywordsAluminum
dc.keywordsFracture mechanics
dc.keywordsTankers
dc.keywordsLiquefied natural gas
dc.keywordsContainment vessels
dc.keywordsLeakage
dc.keywordsFracture (Process)
dc.keywordsFatigue cracks
dc.keywordsMembranes
dc.keywordsShips
dc.keywordsMaintenance
dc.keywordsSafety
dc.keywordsAluminum alloys
dc.keywordsNondestructive evaluation
dc.keywordsDesign AND Fatigue
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record