Show simple item record

dc.contributor.authorA. D. Wilson
dc.date.accessioned2017-05-08T23:08:51Z
dc.date.available2017-05-08T23:08:51Z
dc.date.copyrightJuly, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26878#269_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93365
dc.description.abstractThe fatigue and toughness properties of a C-Mn-Cb plate steel, described both by ASTM A633C and A737B, are presented and compared to the properties of A516-70. Production plate steels made by both conventional steelmaking techniques and low sulfur-calcium treatment are evaluated. The superiority of A633C over A516-70 in transition and upper shelf fracture toughness is demonstrated in both Charpy-V-notch and Dynamic Tear impact testing, as well as J-Integral fracture toughness at both a slow and fast loading rate. There was no substantial difference in fatigue behavior between the A633C and A516-70 steels, except that A633C was found more sensitive to inclusions, thus there was more of a pronounced improvement shown by using calcium treatment. The fatigue behavior was assessed using S-N axial fatigue testing, fatigue crack propagation testing and by determining the threshold for fatigue crack propagation. The residual stresses in A633C in the quenched and tempered condition influenced the fatigue crack propagation and near threshold behavior of this steel.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleThe Fatigue and Toughness Properties of a C-Mn-Cb Plate Steel
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224811
dc.journal.fristpage269
dc.journal.lastpage279
dc.identifier.eissn1528-8889
dc.keywordsFatigue
dc.keywordsSteel
dc.keywordsToughness
dc.keywordsFatigue cracks
dc.keywordsFracture toughness
dc.keywordsImpact testing
dc.keywordsSulfur
dc.keywordsFatigue testing
dc.keywordsIron and steel making
dc.keywordsResidual stresses
dc.keywordsTesting AND ASTM International
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record