Show simple item record

dc.contributor.authorH. J. Rack
dc.date.accessioned2017-05-08T23:08:51Z
dc.date.available2017-05-08T23:08:51Z
dc.date.copyrightJuly, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26878#264_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93364
dc.description.abstractThe influence of test temperature on the blunt notch and precracked fracture toughness behavior of aged 18Ni (350) maraging steel has been examined. Both toughness measurements exhibit a decrease with decreasing test temperature. The tough-to-brittle transition observed in the precracked fracture toughness samples is similar to that previously reported for the tensile ductility of this alloy and can be associated with a gradual change in fracture mode, from microvoid coalescence at elevated temperatures to quasi-cleavage at low temperatures. This fracture mode transition is suppressed to lower temperatures in the blunt notch samples. Here the fracture behavior is complicated by the presence of a shear failure region immediately below the notch root. It is suggested that it is the development of this shear failure region which controls the fracture resistance of blunt notched aged 18Ni (350) maraging steel. Apparently shear initiation requires the attainment of a critical strain at the surface of the notch root, with this strain decreasing with decreasing test temperature.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleFracture Mode Transitions in Aged Ultra-High Strength 18Ni (350) Maraging Steel
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224810
dc.journal.fristpage264
dc.journal.lastpage268
dc.identifier.eissn1528-8889
dc.keywordsSteel
dc.keywordsFracture (Process)
dc.keywordsTemperature
dc.keywordsShear (Mechanics)
dc.keywordsFailure
dc.keywordsFracture toughness
dc.keywordsToughness
dc.keywordsLow temperature
dc.keywordsDuctility
dc.keywordsAlloys
dc.keywordsMeasurement
dc.keywordsElectrical resistance AND Brittleness
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record