Show simple item record

dc.contributor.authorHideo Awaji
dc.date.accessioned2017-05-08T23:08:51Z
dc.date.available2017-05-08T23:08:51Z
dc.date.copyrightJuly, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26878#257_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93363
dc.description.abstractOn the basis of traditional fracture criteria and numerous data on the fracture under multiaxial stresses, we propose a new macroscopic criterion for brittle fracture in the state where in biaxial or triaxial stresses, compressive stress predominates. We base our theory on the concept of fracture mechanics, especially of mode II fracture. Our criterion is expressed as follows, τc = τ0 + ζ1 (σ1 + σ3) + ζ2σ2 where τ0 = (KIIc/KIc). at is the imaginary pure shearing strength of the material, ζ1 = (KIIc/KIc) (at/ac) – 1/2 and ζ2 are the coefficients corresponding to the restraint for crack propagation. The criterion may be applicable to mode II fracture which occurs in the state where compressive stress is predominant.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleMacroscopic Brittle Fracture Criterion Under Multiaxial Stresses
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue3
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224808
dc.journal.fristpage257
dc.journal.lastpage263
dc.identifier.eissn1528-8889
dc.keywordsBrittle fracture
dc.keywordsStress
dc.keywordsFracture (Process)
dc.keywordsCompressive stress
dc.keywordsCrack propagation
dc.keywordsShearing AND Fracture mechanics
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record