Show simple item record

dc.contributor.authorB. A. Cowles
dc.contributor.authorR. V. Miner
dc.contributor.authorD. L. Sims
dc.contributor.authorJ. R. Warren
dc.date.accessioned2017-05-08T23:08:49Z
dc.date.available2017-05-08T23:08:49Z
dc.date.copyrightOctober, 1980
dc.date.issued1980
dc.identifier.issn0094-4289
dc.identifier.otherJEMTA8-26879#356_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93351
dc.description.abstractFive gas turbine disk alloys representing a range of strengths and processing methods were tested for resistance to both cyclic crack initiation and propagation at 650° C using a 0.33 Hz fatigue cycle and a cycle incorporating a 900 s tensile dwell. At the low strain ranges pertinent to disks, resistance to crack initiation increased with increasing tensile yield strength among the alloys, though the advantage was somewhat smaller for the creep fatigue cycle. Cyclic crack growth resistance, however, decreased with increasing strength and very markedly so for the dwell cycle.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleCyclic Behavior of Turbine Disk Alloys at 650°C
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue4
dc.journal.titleJournal of Engineering Materials and Technology
dc.identifier.doi10.1115/1.3224824
dc.journal.fristpage356
dc.journal.lastpage363
dc.identifier.eissn1528-8889
dc.keywordsAlloys
dc.keywordsTurbines
dc.keywordsDisks
dc.keywordsCycles
dc.keywordsElectrical resistance
dc.keywordsFracture (Materials)
dc.keywordsFatigue
dc.keywordsCreep
dc.keywordsGas turbines AND Yield strength
dc.treeJournal of Engineering Materials and Technology:;1980:;volume( 102 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record