Show simple item record

dc.contributor.authorF. C. Appl
dc.contributor.authorB. N. Rao
dc.contributor.authorB. H. Walker
dc.date.accessioned2017-05-08T23:08:26Z
dc.date.available2017-05-08T23:08:26Z
dc.date.copyrightMarch, 1980
dc.date.issued1980
dc.identifier.issn0195-0738
dc.identifier.otherJERTD2-26377#12_1.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/93154
dc.description.abstractThe effects of surfactant solution aluminum chloride on cutting granite rock with a diamond were investigated experimentally. Tests were conducted by cutting on the cylindrical surface of a granite cylinder in a lathe with a single spherically shaped diamond cutting tool. The cutting fluid consisted of various concentrations of aluminum chloride in deionized distilled water. The cutting force components were determined by means of a tool post dynamometer and were recorded continuously during the tests. Diamond wear was determined by periodically photographing the wear flat through an optical miscroscope. Results indicate that cutting forces and diamond wear rate are influenced by the additive. The normal cutting force is maximum at a concentration of 7 × 10−6 molar, and the tangential cutting force is maximum at 3 × 10−6 while the diamond wear rate is minimum at 3 × 10−6 molar. It is also found that there is an effect of concentration on relative tool life for constant depth cutting, but that maximum life occurs at higher levels of concentration.
dc.publisherThe American Society of Mechanical Engineers (ASME)
dc.titleEffects of AlCl3 Additive on Cutting Forces and Diamond Wear Rate While Cutting Granite With a Single Diamond
dc.typeJournal Paper
dc.journal.volume102
dc.journal.issue1
dc.journal.titleJournal of Energy Resources Technology
dc.identifier.doi10.1115/1.3227841
dc.journal.fristpage12
dc.journal.lastpage17
dc.identifier.eissn1528-8994
dc.keywordsForce
dc.keywordsWear
dc.keywordsDiamonds
dc.keywordsCutting
dc.keywordsAluminum
dc.keywordsDynamometers
dc.keywordsCutting tools
dc.keywordsFluids
dc.keywordsRocks
dc.keywordsSurfactants
dc.keywordsWater AND Cylinders
dc.treeJournal of Energy Resources Technology:;1980:;volume( 102 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record